Brush Fencing
   48mm thick brush panels come in a standard size of  1700mm high and 1800mm wide and are $174.35 each.  Roll tops to suit are $54.95 each.

*NOW ONLY AVAILABLE AT FENCEBUILD
2130mm high x 1800mm wide Brush Panels*
48mm thick - $243.20 per panel
58mm thick - $272.40 per panel


Panels can be specially ordered in the following lengths:
1700mm high - 1100mm and 2200mm long
 2130mm high - 1100mm and 2000mm long
These panels will be more expensive per metre that standard panels. 58mm thick brush can also be ordered in. Roll tops can be specially ordered up to 2200mm long. These items are priced on an order by order basis.

You can have the brush panels pre-treated with a fire retardant and preservative for $31.35 per metre.
(This allows two coats to both sides of the panel)

Single gates come 1730mm high x 900mm wide for $448.85 inc. fittings.
Or 1800mm high x 900mm wide for $468.10 inc. fittings.
 Double gates are 1730mm high and have 2 x 1400mm wide leafs, and are $802.25 inc fittings.

Pre-frames modules are 1760mm high and 1800mm wide. They are available with galvanised posts and rails for $359.35 or with powdercoated posts and rails for $401.40.
 
  
Front                                                                 Back

BEWARE: there are cheap panel imitations now available on the market in some areas of Victoria, where inferior strength colorbond panel fencing posts and channel components are being used to frame thin brush panels without the use of any supporting mid-rail.   Without the mid-rail the brushwork is likely to bow and sag with age and will eventually come out of the top channel member.

Pre-framed and standalone brush panels can be viewed instore at Fencebuild. Click here for our contact details.